To a Square Walnut Table

In answering a comment in the previous post I listed the different forms that can be attributed to the Bartram family joiner.  They include tea tables, stands, oval tables, three drawer and single drawer dressing tables, tables without drawers, chests of drawers, chests over drawers, spice boxes, and spice boxes on frames.  All of these forms but one have been published, though some of the publications are auction catalogues not generally or easily available.  (I’ve provided images in this blog of some of the objects at auction and also construction details and images not available anywhere else.)

The one form not previously published is a table without drawers.

table

Black walnut table c. 1725.  Peter Wentz Farmstead.  Attributed to the Bartram family joiner.

top

Black walnut table c. 1725.  Peter Wentz Farmstead.  Attributed to the Bartram family joiner.

leg

Black walnut table c. 1725.  Peter Wentz Farmstead.  Attributed to the Bartram family joiner.  Leg detail.

The table is part of the furnishings of the house museum at the Peter Wentz Farmstead, Landsdale, Montgomery County, Pennsylvania, about 25 miles from Philadelphia.  Like most furniture made in the early eighteenth century, it came to the Farmstead with no provenance other the the name of its last owner.  It is relatively plain and uncomplicated but the turning profiles of the legs and stretchers have the distinctive design vocabulary of other objects attributed to this shop.  In  marketplace jargon this would be called a “farm table”, “tavern table”, or “work table” and most likely be given a rural attribution, far from Philadelphia.  But as we learn from John Head’s account book, joiners capable of fashioning the most up-to-date and expensive forms also supplied simpler, less costly objects when required.

This table though is far from the plainest tables being produced at the time.  While there is no drawer, the legs, and most especially the stretchers, did not need to be decoratively turned for the the table to serve its function.

compare

Comparison of the Wentz Farmstead table leg and a leg from a single drawer table attributed to the Bartram family joiner.

foot

The turned feet of the Wentz Farmstead table are missing. They would have looked like the foot shown here from the single drawer table shown in the previous slide.

The kitchens of rural farm houses  certainly needed “farm” and “work” tables but so did townhouses in cities.  John Head had a separate 18 by 9 foot two-story kitchen behind his house that required a table for food preparation.  Might he have made a table such as this in his own style for his family’s  use?

We know that in 1735 Head sold a “a Square walnut Table” to James Steel for which Steel was debited one pound.  It is easy to imagine that it closely resembled the Wentz Farmstead table.  (“Square” tables in the eighteenth century had rectangular tops.  The use of the term  “square” was to differentiate a table with a sawn rectangular top from one with a round or turned top.)

steel square table spice box.crop

 

Advertisements

7 thoughts on “To a Square Walnut Table

  1. Hi, do you know if this table is very tall (even without its feet), or if that is an exceptionally short chair next to it? Either way it must have been difficult to sit at due to those very deep rails.
    Cheers
    Warwick

    • The table is normal height, with the missing feet it is 30-31 inches high. The chair in the photo is on the small side and has also has losses to its feet. You’re right, it would be difficult to sit around this table. However, I don’t believe this type of table would have been used for dining but rather as a work table for food preparation that you would stand around. Contemporary oval tables of various sizes were designed and used for sit down meals.

  2. “Square” tables in the eighteenth century had rectangular tops.
    Not all though, I just purchased a “square” table with a side hung drawer at the Vogel sale, the frame is exactly 33-5/8″ X 33-5/8″ square with a hi-lo stretcher base. The top is replaced.

    • Well, yes, tables with square tops were made. I wanted to say that you will not find “rectangular” used to describe what we today call rectangular tops, they were called “square”. This helps in understanding 18th century documents. If you were looking at a table with a rectangular top that you think might be a table in a period document – an inventory, etc – and the document calls it a “square table”, you should not discount it, the “rectangular” top table could very well be the on called “square” in the document.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s